Quick Answer: Is Rg8x Good For VHF?

What is the difference between rg8 and rg8x?

RG8 is a thicker 50 ohm cable, at 12 AWG, that can provide a stronger signal than RG58.

It is mainly used for amateur radio.

There is also a version called RG8X, which is thinner at 16 AWG but provides similar signal quality..

Can rg6 be used for ham radio?

RG-6 is rated for applications below 150 MHz, so it can be used with transmitters and antennas on the 2 meter band. but above the frequency, the losses are going to be so high, that you might as well invest in quality 50 Ohm cable.

What is a coaxial jumper used for?

Coax jumper cables are commonly used to transmit signal and radio frequency (RF) in the multi megahertz range. Coaxial cable jumpers can be built with various types of connectors and cable types, with varying lengths depending on the intended use or application.

What is rg11 coaxial cable?

RG11 is a 75 ohm standard cable for Television, Satellite or Cable TV coax runs. It is less flexible than its cousin RG6 but offers lower loss, which means more signal is delivered to the receiver. This makes it an ideal choice for long runs, since loss becomes more of a concern as cable length increases.

Is LMR 400 the same as rg8?

RG-8 and RG8X are two different things. RG-8 is a thicker diameter, while RG8X is a little thicker than RG-58 (a typical mobile radio antenna cable), but not as thick as RG-8. LMR400 is a cable that’s about the thickness of RG-8, but is constructed differently.

What is the best coax for ham radio?

10 Best Coax For HF Ham Radio ReviewsSteren 205-700 – Best Overall Coax For HF Ham Radio. … MPD Digital LMR400 (35ft) – Best Heavy Duty Coax For HF Ham Radio. … Cable Experts RG-8X Weatherproof Jumper – Best Budget Coax For HF Ham Radio. … RG58 15M Low Loss Extension Coax. … Wilson 400 N-N coax. … HYS TC – 110m. … Boobrie UHF RG58.More items…

How many watts can LMR 400 handle?

Power Capacity (In watts 104 °F, 40 °C)MHz:30450LMR-400®2100550Click here to view POWER CHART FOR ALL CABLE TYPES

What coax should I use?

Coaxial cable designed for domestic television should be 75 Ohm, with RG-6 coaxial being ideal for TV. The best coaxial cable for HDTV is RG-11. This type of cable offers a higher gauge than others, which provides more space for signals to transfer.

Which is better rg6 or rg11?

RG11, because of its bigger size and better handling of attenuation, is superior when it comes to preserving signal quality than RG6. It’s also able to work at much higher frequencies than RG6 due to it having less signal loss. … RG6 is the more familiar standard, particularly when it comes to satellite cables.

What is the best coaxial cable for Internet?

Top 7 Best Coaxial Cables For Internet And HDTVKabelDirekt RG6 Coaxial Cable.Southwire / Logico RG6 Coaxial Cable.Mediabridge RG6 Coaxial Cable.Cable Matters RG6 Coaxial Cable.Phat Satellite RG6 Coaxial Cable.JSAUX RG6 Coaxial Cable.Ultra Clarity Cables Coaxial Cable.

Is rg8x good for HF?

The RG8X coax cable and UHF connectors both work perfectly well for HF. The coax cable is very high quality with 95% copper braid shield, and the signal retention is easily comparable to something like the LMR400, which is a much more expensive option.

Does coax length affect SWR?

“the length of the feedline will not change the swr it will change the apparent reading depending on what wave length you read the swr at. . just as adding a signifigant length of coax, the resultant loss will look like a lower swr.”

What is rg8?

RG8 is a class of coaxial cable appropriate to employ in carrying radio transmission signals. They are mostly used and found in radio stations, audio control rooms, or as connections for exterior radio antennas.

What is LMR 400 cable used for?

LMR-400® Jumpers, Assemblies. and Bulk Coax. LMR400 is a high quality 50 ohm coaxial cable product from the Times Microwave Corporation. It can be used for a variety of ham radio, CB, commercial and marine applications.